Changing The Main Battery; Removing The Battery From The Computer - Toshiba 2805-S503 User Manual

106
Mobile Computing

Changing the main battery

You can set multiple alarms. Each alarm can be set to alert you
when a specified percentage of remaining battery power has been
reached. You can set how the warning occurs: sound an alarm,
display a message, both, or none. You can also set the computer to
enter Standby mode or Hibernation mode, or to Shutdown when
the alarm goes off.
To set an alarm:
1 Click Start, point to Settings, and then click Control Panel.
2 Double-click the Toshiba Power Saver icon.
3 Choose the Power Save Modes tab, then under the Running
on Batteries section, click Details.
4 Click the Alarm tab and set the alarm, as desired.
Changing the main battery
When your battery power is running low, you have two options—
connect the computer to an AC power source or install a charged
battery.
CAUTION: When handling a battery, be careful not to drop it
or short-circuit its terminals.

Removing the battery from the computer

1 Save your work.
2 Shut down the computer or place it in Hibernation mode
according to the instructions in
mode more quickly" on page
3 Remove all cables connected to the computer.
4 Close the display panel and turn the computer upside down
with the left side of the computer facing you.
"Going into Hibernation
95.