Advertisement
9' MARKET UMBRELLA
2 Remove knob from base assembly as shown. With the
assistance of another adult, fit pole of umbrella assembly into
corresponding hole of base assembly (sold separately) as
shown. Re-attach knob and turn clockwise to secure.
4 Insert pin into pole of assembly to secure umbrella.
Assembly is now complete.
Made in Indonesia - r04
umbrella
assembly
knob
base
assembly
(sold separately)
pin
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
3 Pull down on pulley cords to raise umbrella at desired
height.
CLEANING & CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners.
pulley
cords
Page 2 of 2
Advertisement
