Download Print this page

Crate&Barrel 9’ MARKET UMBRELLA Assembly

Download this manual

9' MARKET UMBRELLA

Thank you for purchasing the 9' Market Umbrella.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

ASSEMBLY

umbrella frame

Made in Indonesia - r04

1 A) Fit umbrella cover (sold separately) over umbrella

frame as shown. Tuck each end of frame into correspond-

ing pocket of cover.

B) Attach finial to top of umbrella assembly. Turn finial

clockwise to secure.

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

COMPONENTS

umbrella cover

1 - umbrella frame

1 - finial

1 - umbrella cover

(sold separately)

NOTE: Make sure eyelet of finial is

aligned with the inset nut on top of

umbrella frame.

finial

Page 1 of 2

Page 1 9’ MARKET UMBRELLA COMPONENTS 1 - umbrella frame 1 - finial Thank you for purchasing the 9’ Market Umbrella. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
Page 2 9’ MARKET UMBRELLA umbrella assembly pulley cords knob base assembly (sold separately) 2 Remove knob from base assembly as shown. With the assistance of another adult, fit pole of umbrella assembly into 3 Pull down on pulley cords to raise umbrella at desired corresponding hole of base assembly (sold separately) as height.