Energy Consumption Display; Basic Settings - Bosch NKC8 17 Series Instruction Manual

Energy consumption display

You can use this function to have the total energy consumption
between switching the hob on and off displayed.
Once switched off, the energy consumption in kilowatt hours
(e.g. 1.08 kWh) is displayed for 10 seconds
The accuracy of the display depends, amongst other things, on
the voltage quality of the power supply.

Basic settings

Your appliance has various basic settings. You can adapt these
settings to your needs.
Display Function
Automatic childproof lock
™‚
Switched off.*
‹
Switched on.
‚
™ƒ Audible signal
‹ Confirmation signal and operation error signal are switched off.
Only the operation error signal is switched on.
‚
ƒ Only the confirmation signal is switched on.
Confirmation signal and operation error signal switched on.*
„
Energy consumption display(Ask your electricity supply company what the mains voltage is)
™„
Consumption display switched off.*
‹
‚ Consumption display with mains voltage at 230 V.
Consumption display with mains voltage at 400 V.
ƒ
„ Consumption display with mains voltage at 220 V.
Consumption display with mains voltage at 240 V.
...
Automatic timer
™†
Switched off.*
‹
‚ - ŠŠ Cooking time, after which the hotplates switch off
Duration of the timer end signal
™‡
‚ 10 seconds.*
30 seconds
ƒ n
„ 1 minute.
Activation of the filament circuits
™ˆ
‹ Switched off.
Switched on.
‚
ƒ Last setting before the hotplate was switched off.*
Reset to basic setting
™‹
‹ Switched off.*
Switched on.
‚
* Basic setting
10
The display has not been activated. You can find out how to
activate the display in the Basic settings section.