Omnitronic VRM PRO Series User Manual

USER'S MANUAL
STUDIO MICROPHONE
Double Ribbon Microphone for excellent recording sound
The VRM-1100 PRO / VRM-1110 PRO was designed for professional studio recording
performances.
Professional Double Ribbon microphone with figure 8 pattern
2x2" aluminium ribbon (2.5 micron thick)
Ideal for recording studios, accoustic instruments, strings, horns, orchestras, e-guitars, drum
overheads and choral groups
Particularly suitable for recording musical instruments with high SPL (up to 148 dB) and large
dynamic range
Balanced XLR output
Available in silver and black
Safety Instructions
Maintenance and service operations are only to be carried out by authorized dealers. Damage,
caused by manual modifications on this device is not subject to warranty. If the microphone is used for
other purposes than originally intended or if it is not correctly connected, the product may suffer
damages and the guarantee becomes void.
Protect the device against humidity and heat. The ambient temperature must always be between
-5° C and +45° C. The relative humidity must not exceed 50 % with an ambient temperature of 45° C.
Setting into Operation
Screw the shock mount on your microphone stand and insert the microphone from above.
Connect the microphone to the XLR microphone input of your audio unit (e.g. mixing console) using a
balanced microphone cable with 3-pin XLR plug.
For voice recordings, always use a windshield to protect the capsule from moisture.
Cleaning and Maintenance
For cleaning the microphone only use a soft lint-free and moistened cloth. Make sure not to allow any
water to enter the device and never use any solvent cleansers.
© Copyright
Nachdruck verboten!
Reproduction prohibited!
or live
Technical Specifications
Ribbon type/Dimensions (LxW): ............2 x 2.5 microns pure aluminium/35 x 5 mm
Polar pattern: .........................................Figure 8
Frequency range: ..................................30 Hz - 15,000 Hz, ±3 dB
Nominal impedance: .............................<600 Ohms
Load impedance: ..................................3000 Ohms
Max. SPL: ..............................................148 dB (THD 1% @ 1 kHz)
Equivalent SPL: ....................................18 dBA
Sensitivity: .............................................-55 dB
S/N ratio: ...............................................70 dB
Connection: ..........................................3-pin XLR, balanced
Dimensions (Ø x L):................................37 x 175 mm
Weight: .................................................500 g
Please note: Every information is subject to change without prior notice. 10.05.2007 ©
VRM PRO SERIES
Delivery Includes
VRM-1100 PRO [black]/
VRM-1110 PRO [silver] Ribbon Microphone
Shock mount
Foam-lined wooden box
frequency response (figure 8) polar pattern (figure 8) at 1 kHz
www.omnitronic.com
13030826_V_1_0.DOC