Advertisement
'Get In The Game' Football Toss Wall
Supply List and Build Instructions
BUILD INSTRUCTIONS
8. Attach ground support to 4'x8' with two
(2) ¼"-20x4" carriage bolts, flat washers
and wing nuts.
9. Cut two (2) 72 3/8" 2x4s to use as back
supports between ground support and 4'x8'
frame, with 9/32" holes drilled 1 3/16" down
and 2 3/8" left from top of each support arm
(same hole positioning should be drilled on
both sides of each arm support). Attach tops
to 4'x8' frame spacers and at back ends of
ground support.
10. Paint/decorate outward facing side of
plywood . . . And, get into the game!!
Advertisement
