Advertisement
'Get In The Game' Football Toss Wall
Supply List and Build Instructions
BUILD INSTRUCTIONS
4. Affix two (2) 8" sections (to center) 63 5/8"
from bottom of frame. (See Diagrams 1-Side
and 1-Back.)
5. Affix full sheet of 4'x8'x½" plywood to 4'x8'
frame with 1 ½" #10 deck screws.
6. Draw and cut three (3) 14" diameter holes (at
locations of your choice) in the plywood.
7. Construct bottom (ground) support by using
two (2) 48" 2x4s and one (1) 42" 2x4, fastened
with two (2) 2 ½" # 10 decking screws on both
sides. (See Diagrams 2 and 2A.) Note: Notch
both 48" sections (both sides at 45-degree
angles) at the ends that attach to the 4'x8'
frame.
Advertisement
