Table of Contents
Advertisement
The EASTWOOD CRIMP-RIGHT WEATHER-TIGHT CONNECTOR CRIMPER SET brings a valuable,
previously professional-only Weather-Tight connector installation capability to the serious automotive
DIY'er. Replace damaged factory installed connectors or add accessories while maintaining full factory
wire harness integrity.
CONTENTS
(1) Quick Jaw Change, Cushion Grip, Ratcheting Weather Pack Crimping Tool
(2) Sets of Interchangeable Crimping Dies:
- Set of H6 Dies for 18 to 22 Ga.
- Set of H7 Dies for 12 to 16 Ga.
(1) Terminal Clip Release Tool
(25) Silicone Connector Wire Seal Inserts (Green) for 18 to 20 Ga. wires
(30) Silicone Connector Wire Seal Inserts (Green) for 14 to 16 Ga. wires
(25) Silicone Connector Wire Seal Inserts (Blue) for 12 Ga. wires
(20) Male Crimp Terminals for 18 to 20 Ga. wires
(20) Female Crimp Terminals for 18 to 20 Ga. wires
(20) Male Crimp Terminals for 14 to 16 Ga. wires
(20) Female Crimp Terminals for 14 to 16 Ga. wires
(20) Male Crimp Terminals for 12 Ga. wires
(20) Female Crimp Terminals for 12 Ga. wires
(3) 1 Pole Male Receptacle Housing
(3) 1 Pole Female Receptacle Housing
(2) 2 Pole Male Receptacle Housing
(2) 2 Pole Female Receptacle Housing
(1) 3 Pole Male Receptacle Housing
(1) 3 Pole Female Receptacle Housing
(1) 4 Pole Male Receptacle Housing
(1) 4 Pole Female Receptacle Housing
(1) Partitioned Blow Molded Case
2
Eastwood Technical Assistance: 800.343.9353 >> techelp@eastwood.com
Advertisement
Table of Contents
