Before Fitting - whatlock Magnetic Security Lock Fitting Instructions Manual

Before Fitting

Check that all of the components
are present.
Ensure the area where you are fitting the
locks is clean, dry and free from dust.
Decide on a position to fit whatlock® e.g.
on a cupboard 50mm (2 inches) below the
door knob.
The simplest and quickest method to fit
whatlock® is to use the 3M adhesive pads.
You will need a sharp pencil or small
marker pen.
Please allow 24 hours for full adhesion
before using the lock.
For added strength, fit with the supplied
screws. You will need as above, a bradawl
and a small Phillips screwdriver.