Summary of Contents for whatlock Magnetic Security Lock
- Page 1 Magnetic Security Lock The Professionals’ Choice Fitting Instructions Quick & easy to fit in just 5 steps Fitting instruction video whatlock.com...
-
Page 2: Before Fitting
Ensure the area where you are fitting the locks is clean, dry and free from dust. Decide on a position to fit whatlock® e.g. on a cupboard 50mm (2 inches) below the door knob. The simplest and quickest method to fit whatlock®... - Page 3 Components Strike Plate x 2 Lock x 2 Screws x 12 Key x 1 Template x 2...
- Page 4 On the template, peel off the narrow adhesive strip. Affix onto the front face of the cupboard side with the guide line over the inside edge. Fold the template onto the inside wall of the cupboard. Mark the two strike plate hole locations.
- Page 5 Leave the template in position. Peel the backing paper from the foam tape. Close the door firmly onto the template. Open the door, the template will have transferred to the exact location for the lock on the inside of the door. Mark the four holes.
- Page 6 To stick down the strike plate and lock using the 3M adhesive pads, remove the backing from the pad and place firmly into position by matching the holes to the pre-marked locations. To use the screws, as above and use a bradawl to start the screw hole and use the screws provided.
- Page 7 Fitting to Drawers There are many, sizes, shapes and kinds of drawers. Please ensure whatlock® will work on your type of drawer before commencing fitting. The example below illustrates how whatlock® can be fitted to a drawer. Follow the same 5 Steps Fitting Instructions as described for cupboards.
- Page 8 Using your whatlock® To open, pass the magnetic key over the front of the door in line with the location of the lock. The catch will release, allowing the door or drawer to open. Automatically locks when the door or drawer is closed.
- Page 9 Lock Lock switched on switched off Keeping the Key Safe and Stored Use the open feature on the key and hang the key up high in a cupboard, attach it to your belt or use a lanyard.
-
Page 10: Technical Information
Removal Should you have a need to remove whatlock®, gently prise off the lock and strike plate using a metal scraper. Clean any residual adhesive with turpentine. - Page 11 Always keep the magnetic key in a safe place. Ensure the magnetic key is out of the reach of children. whatlock® uses very strong magnets – keep away from credit cards, pacemakers and sensitive electronic and storage devices. whatlock® will operate through glass, wood, ceramic tiles, laminates and non-ferrous metals.
- Page 12 30 days to do so from your date of with your whatlock®, we are here receipt. The item, must be unused to help so please contact us so that and in the same condition that we can assist you.
- Page 13 Thank you for purchasing whatlock®, your new magnetic security locking system. whatlock® is the original magnetic security lock – the Professionals' Choice The following information will ensure that you enjoy the best results from whatlock®, giving you reassurance and peace of mind that potentially dangerous materials or valuables are protected and safe from children and other groups.
- Page 14 One key opens multiple locks We take our responsibility as a manufacturer very seriously. whatlock® meets the latest and highest safety standards and is free of harmful substances and chemicals. When you buy whatlock® you can be absolutely confident that whatlock® will ensure you have peace of mind that all is safe and secure.
Need help?
Do you have a question about the Magnetic Security Lock and is the answer not in the manual?
Questions and answers