Wake-Up Notification - ring Retrofit Alarm Kit Z-Wave Technical Manual

Wake-Up Notification

The sensor will wake up every so often to send a Wake-Up Notification to allow the life line master node
controller that the sensor is now available for any queued messages that the controller may have for
the sensor. The time between Wake-Up Notifications can be configured with the Wake-Up Notification
command class to be between 1 and 24 hours with interval steps of 1 minute.
Mapping of the Basic Command Class
The device can be queried with Basic for each of its eight endpoints to see if they are 0 (contact closed)
or 0xFF (contact open).
Z-Wave Command Class
Command Class
Z-Wave Plus Info
Transport Service V2
Security 2
Association
Association Group Info
Multi-Channel Association
Multi-Channel
Battery
Configuration
Device Reset Locally
Manufacturer Specific
Notification
Power Level
Supervision
Wakeup
Version
Firmware Update MD
Firmware Update MD
Version
2
2
1
2
1
3
4
1
1
1
2
8
1
1
2
3
4
2
5