Comcast HOME Quick Start Manual

Device Overview

Network Indicator

Getting Started

Powering Up and Pairing

1. Remove the keypad and keypad battery door
from box. (Important: The battery door must be
mounted to wall before aligning and sliding down
to snap keypad to battery door).
2. Set your touch screen to pairing mode and then
pull the "Remove to Pair" tab to put device into
pairing mode.
Security Keypad

Low Battery

Status LED/Proximity Sensor
Quick Start Guide
XFINITY HOME
SECURITY • CONTROL • ENERGY

Battery Compartment

Pairing/Tamper Button

3. The keypad should start the joining process
automatically. When the keypad is not joined to a
network, the network indicator will be off. Once
it is joined, the network icon will become solid
anytime that the keypad is awake.
Once the keypad has successfully joined the
network, the pairing LED will turn solid, the
network indicator will turn on, and the security
system should indicate that it has paired with
the keypad.