Page 1
AUTO the fan runs only when the heating or cooling system is on. AUTO MODE If set to , the fan will run continuously. Use this setting for improved air circulation. BRIVIS CALL CENTRE WALL CONTROL MANUAL 601 ISSUE 1...
Page 2
Note: make sure the thermostat is set to the system you want to use. (heat or cool) Note: to cancel an unwanted time period (except wake), press and hold the up arrow for 4 seconds while in set schedule mode. BRIVIS CALL CENTRE WALL CONTROL MANUAL 601 ISSUE 1...
E.g. if the wake time is set for 6am and the temperature at 21. The unit will turn on before 6am to ensure that the temperature is at 21 by 6am. BRIVIS CALL CENTRE WALL CONTROL MANUAL 601 ISSUE 1...
Page 4
1 on the right of the DOWN screen to a 0. • Press the key to return to normal screen. Adaptive Intelligent Recovery has now been removed. BRIVIS CALL CENTRE WALL CONTROL MANUAL 601 ISSUE 1...
All other settings are permanently stored in memory and do not require battery power. • Pull at bottom to remove from wall plate. • Turn thermostat over, remove batteries, insert AA alkaline batteries then reinstall thermostat. BRIVIS CALL CENTRE WALL CONTROL MANUAL 601 ISSUE 1...