IASUS XSound 2 User Manual

XSound 2 Helmet Speakers
Congratulations on your purchase of IASUS Concepts
XSound 2 Helmet Speakers. The XSound 2 Helmet Speakers
are a premium sound system designed specifically for
helmets. Each of the ultra-thin speaker headphones
contains a premium full-range audio driver and is lined with
3M™ Velcro for secure attachment in full-face and some
half-face helmets.
The XSound 2 Helmet Speaker System consists of two
padded headphone speakers that fit comfortably in the
space between the helmet and your ear. Also included is a
connector cable and Velcro patches. An optional premium
volume control cable is also available.
You must register your product to be eligible for warranty
service. To register online, please visit our website at
www.iasus-concepts.com/registration.html.
warranty service, you will need to provide a copy of your
dated sales receipt to confirm warranty status. Please
retain the original for your records.
Use and Care
-Follow all operating guidelines and parameters of the
media device with which you are using the speakers.
-Keep speakers clean and dry.
-Do not attempt to disassemble the speakers.
-Do not drop, knock, or shake the speakers.
-Do not use harsh chemicals, cleaning solvents, or strong
detergents to clean the speakers.
CAUTION
It is dangerous to ride a motorcycle or engage in sports
activities without being aware of your environment. It may
be illegal in some areas. Only use XSound 2 Helmet
Speakers at volume levels at which you can still remain alert
to your surroundings.
Do not operate your portable media player at high audio
volumes when using XSound 2 Helmet Speakers. Hearing
experts advise against continuous exposure to high volume
levels. If you experience ringing in your ears, discontinue
using the speakers.
Getting Started
A1, A2 Padded speaker earphones
B Male/female jack connector
C Plug for portable media device
D1, D2 Velcro patches
To receive
E Connector cable
F Volume cable (optional)
Troubleshooting
Problem Check to make sure that...
No Sound ...your portable media device is turned on
and has power.
...the volume on the portable media device is
not set too low.
...the plugs into the connector cord/volume
cable and into the media player are fully
inserted.
...if you are using a volume cable, the volume
dial is not set at a low level.
For more help with troubleshooting, please contact your IASUS
Concepts dealer or visit the IASUS Concepts website at
www.iasus-concepts.com.
Using Your XSound 2
1. Peel the "loop" side of the Velcro patches (D1, D2) off from
each patch and remove the white backing.
2. Attach the loop Velcro patches to the interior of your helmet,
aligned at ear level.
3. Affix the padded speakers (A1, A2) to the helmet by matching
up the Velcro pieces. Make sure with the longer cable is on the
left.
4. Plug the connector cord (E) or volume cable (F) into your
speakers at connector (B). Plug the connector cord/volume
cable into your mobile media player with connector (C). Your
helmet speakers are now operational.
5. If desired, tuck the wires into the lining of your helmet.
1-Year Limited Warranty
IASUS Concepts Limited warrants that the XSound 2 Helmet Speakers sold
by IASUS Concepts or its authorized agents is free from defects in materials
and workmanship under normal use for one year. This warranty is only
applicable to the original purchaser in possession of a dated sales document
receipt that includes the name of the company from which it was
purchased. This warranty is in lieu of and excludes all other warranties,
expressed or implied, including any implied warranty of merchantability or
fitness, and of any other obligation on the part of IASUS Concepts Limited.
WHAT THIS WARRANTY DOES NOT COVER
- Damage from improper operation, misuse, neglect such as dropping the
product onto hard surfaces, contact with extreme humidity or heat, or
acts of nature (lightning, floods, power surges etc.).
- Products that may have been tested, adjusted, installed, maintained,
repaired or altered in any way by persons not expressly approved by IASUS
Concepts Limited.
- Cords that are stretched, burned, torn, or cut.
- Products purchased more than 12 months previous to the current date.
- Products that are not accompanied by a valid proof of purchase.
TO REGISTER FOR YOUR WARRANTY
You must register your product to receive warranty service. To do so and to
view detailed information about our warranty service, please visit
http://www.iasus-concepts.com/nt/support.htm.