Service; Control Panel; Switching On The Fridge; Switching Off The Fridge - Electrolux SANTO 76308 KA User Manual

Hide thumbs Also See for SANTO 76308 KA:
Table of Contents

Advertisement

Available languages

Available languages

  • ENGLISH, page 1
• The appliance must not be located close to radiators or cookers.
• Make sure that the mains plug is accessible after the installation of the appliance.
• Connect to potable water supply only.

Service

• Any electrical work required to do the servicing of the appliance should be carried out
by a qualified electrician or competent person.
• This product must be serviced by an authorized Service Centre, and only genuine spare
parts must be used.
Environment Protection
This appliance does not contain gasses which could damage the ozone layer, in either its
refrigerant circuit or insulation materials. The appliance shall not be discarded together
with the urban refuse and rubbish. The insulation foam contains flammable gases: the
appliance shall be disposed according to the applicable regulations to obtain from your
local authorities. Avoid damaging the cooling unit, especially at the rear near the heat
exchanger. The materials used on this appliance marked by the symbol

CONTROL PANEL

1
Fridge Pilot light
2
Fridge ON/OFF switch
3
Fridge temperature regulator, + button
4
Fridge temperature indicator
5
Fridge temperature regulator, - button
6
TURBO COOLMATIC indicator
7
TURBO COOLMATIC button

Switching on the fridge

1. Insert the plug into the mains socket.
2. Press ON/OFF switch .
3. The Pilot Light will light up.

Switching off the fridge

1. Keep ON/OFF switch pressed for more than 5 seconds.
2. A countdown on the temperature indicator, from -3 -2 -1 will be shown. When "1"
appears the fridge is turned off. The temperature indicator switches off. The Pilot
light switches off.
4) If a water connection is foreseen.
1
2
3
4)
4
5
6
Control panel
7
5
are recyclable.

Advertisement

Table of Contents
loading

Table of Contents