Table of Contents
Advertisement
TAP100/200
The tool is supplied with a wall-mounted Inductive Charging Cradle with a
wall adapter power supply. For optimal performance, return the tool
securely to the cradle when not in use to ensure that the battery is
charged.
NOTICE: Only use the power supply or USB cable that is included in the
tool kit to charge this tool. The use of un-approved power supplies may
damage your tool and will void the tool warranty.
The tool comes with the rechargeable battery already installed. Battery replacement must be done at the
factory.
Battery Indicator
The battery indicator in the lower right of the tool screen indicates the estimated power status of the tool's
rechargeable battery:
When an insufficient amount of power remains, the tool will display a flashing battery icon and power off.
User Guide R.5.3
C
HARGING
FULL Charge
Partial Charge - charging shortly is suggested.
Little power in the battery- charging required.
The battery is FLAT, requires charging
10 |
P a g e
T
OOL
2019
Advertisement
Table of Contents
