Entering text
▲ ▼◄► Scrolls between letters and functions. In the example above, the letter C is highlighted.
●
Selects the highlighted letter and enters it in the text window at the bottom of the display.
In the example above, the letter C is entered in the text window.
Aa
Switches between upper and lower case letters.
←
Deletes one letter.
_
Enters a space.
Concludes text entry and returns to the menu.
Getting started with your Medimi.
2011‐03‐11
Taking your medication
Taking your medication
When it is time to take your medication, e-pill
To dispense medication, press the blinking ejector button twice.
When it is time to take your medication, Medimi will alert you with light, sound and vibration. To
dispense medication, press the blinking ejector button twice.
Keep e-pill
Medimi™ upright when ejecting medication.
®
Keep Medimi upright when ejecting medication.
Medication is ejected into the pil collection cup. Check that the dose is correct.
Medication is ejected into the pil collection
To take the medication, pull the cup down one notch and slant your e-pill
cup. Check that the dose is correct.
imi™ until the pills fall into your hand (see picture).
To take the medication, pull the cup down
one notch and slant your Medimi until the
Following each dose ejection, e-pill
pills fall into your hand (see picture).
tion for the next dose. If e-pill
open the sliding cover and check the display to see which medication(s) are about to
run out. To avoid incorrect medication, fill up with medication immediately.
Refilling medication
Following each dose ejection, Medimi checks if there is sufficient medication for the next dose. If
Medimi alerts you that it is out of medication, open the sliding cover and check the display to see
Remove the pill collection cup.
which medication(s) are about to run out. To avoid incorrect medication, fill up with medication
Take out the cartridge(s) to be refilled. Remember where the cartridge was set in e-pill
immediately.
the cartridge in the same way as described at start-up.
Refilling medication
When the cartridge is reinserted in your e-pill
Remove the pill collection cup.
cartridge was entered and which medication e-pill
Take out the cartridge(s) to be refilled. Remember where the cartridge was set in Medimi. Refill the
cartridge in the same way as described at start‐up.
will ask how many pills are in the cartridge. If the cartridge was empty when it was removed, a suggestion
for a full cartridge, i.e. 7 or 15, is made. If the cartridge contained pills when it was removed, the sugges-
When the cartridge is reinserted in your Medimi, a text message the display will confirm which
cartridge was entered and which medication Medimi expects has been inserted. Medimi will ask how
tion will be the same number as when the cartridge was removed. The number can be changed with ▲ ▼ .
many pills are in the cartridge. If the cartridge was empty when it was removed, a suggestion for a
Confirm by pressing ●.
full cartridge, i.e. 7 or 15, is made. If the cartridge contained pills when it was removed, the
suggestion will be the same number as when the cartridge was removed. The number can be
Note: If a wrong number is entered (e.g. too many), this can lead to incorrect dosages.
●.
changed with
. Confirm by pressing
▼
Note: If a wrong number is entered (e.g. too many), this can lead to incorrect
www.epill.com
dosages.
4
Page 7 of 7
Medimi™ will alert you with light, sound and vibration.
®
Medimi™ checks if there is sufficient medica-
®
®
Medimi™ alerts you that it is out of medication,
Medimi™. Refill
®
®
Medimi™, a text message on the display will confirm which
Medimi™ expects has been inserted. e-pill
®
1-800-549-0095
Getting started with your Medimi.
Medimi start‐up guide
This guide is intended for easy set‐up of Medimi the first time Medimi is used. All settings are
Getting started with your e-pill
available from the Medimi menu under the "Tools" heading. To change settings and perform more
advanced settings, please refer to the User Guide.
e-pill
Package contents
This guide is intended for easy set-up of e-pill
Getting started with your Medimi.
tings are available from the e-pill
Medimi start‐up guide
perform more advanced settings, please refer to the User Guide.
This guide is intended for easy set‐up of Medimi the first time Medimi is used. All settings are
available from the Medimi menu under the "Tools" heading. To change settings and perform more
Package contents
advanced settings, please refer to the User Guide.
Package contents
Med-
®
Medimi component parts
Medimi component parts
e-pill
Medimi™ component parts
®
Medimi™
®
1. Light indicator
6. Sliding cover
2. Eject button
7. Housing cover
3. Display
8. Cartridge module
4. Navigation keys
9. Pill collection cup
5. USB connector
2011‐03‐11
®
Medimi™ start-up guide
®
Medimi component parts
Medimi™ the first time e-pill
®
2011‐03‐11
Page 1 of 7
Medimi™ menu under the "Tools" heading. To change settings and
®
1. Medimi™
2. Two Alkaline batteries type AAA
3. Two pill cartridges (Cartridges are available in two sizes:
①
One with room for 7 large tablets and one with room for
1. Medimi
15 smaller tablets.)
②
2. Two Alkaline batteries type AAA
3. Two pill cartridges (Cartridges are
available in two sizes: One with
①
room for 7 large tablets and one
②
with room for 15 smaller tablets)
③
③
1. Light indicator
6. Sliding cover
2. Ejector button
7. Housing cover
1. Light indicator
3. Display
8. Cartridge module
4. Navigation keys
9. Pill collection cup
2. Ejector button
5. USB connector
3. Display
Note: Do not insert the
batteries yet
1. Cartridge fitted into
3. Cartridge eject button
4. Navigation keys
cartridge module
2. Cartridge entering the
4. Pill collection cup that
cartridge module
must be removed to gain
5. USB connector
access to the cartridge
1. Cartridge fitted into cartridge module
Note: Do not insert the
2. Cartridge entering the cartridge module
3. Cartridge eject button
batteries yet
4. Pill collection cup that must be removed to
gain access to the cartridge
1. Cartridge fitted into
cartridge module
Note: Do not insert the batteries yet!
2. Cartridge entering the
cartridge module
Page 1 of 7
Medimi™.
②
③
Medimi™ is used. All set-
®
1. Ligh
1. Medimi
2. Ejec
2. Two Alkaline batteries type AA
3. Two pill cartridges (Cartridges
3. Disp
available in two sizes: One with
room for 7 large tablets and on
4. Nav
with room for 15 smaller tablet
5. USB
Note:
batter
6. Sliding cover
1. Ca
7. Housing cover
cartr
8. Cartridge module
2. Ca
9. Pill collection cup
cartr
3. Cartridge eject button
1
4. Pill collection cup that
must be removed to gain
Need help?
Do you have a question about the Medimi 862101 and is the answer not in the manual?
Questions and answers