Cooktop Use - Whirlpool  WFG540H0AW Use & Care Manual

KEYPAD FEATURE
KEEP WARM Hold warm
START TIME Delayed start
COOK TIME Timed cooking
CLEAN Clean cycle
START Oven control
(hold 3 sec lockout
to lock)
WARNING
Fire Hazard
Do not let the burner flame extend beyond the edge of
the pan.
Turn off all controls when not cooking.
Failure to follow these instructions can result in death
or fire.
Electric igniters automatically light the surface burners when
control knobs are turned to IGNITE.
Before setting a control knob, place filled cookware on the grate.
Do not operate a burner using empty cookware or without
cookware on the grate.
INSTRUCTIONS
Food must be at serving temperature before placing it in the warmed oven.
1. Press KEEP WARM.
2. Temperature is set at 170°F (75°C) for 60 minutes (1.00 hour).
3. Press START.
4. Press CANCEL when finished.
NOTE: The oven will automatically turn off after 60 minutes.
The Start Time keypad is used to enter the starting time for an oven function with a delayed start.
Start Time should not be used for foods such as breads and cakes because they may not bake
properly.
To set a Timed Cook or a Delayed Timed Cook, see "Cook Time" section.
Timed Cooking allows the oven to be set to turn on at a certain time of day, cook for a set length of
time, and/or shut off automatically.
To set a Timed Cook or a Delayed Timed Cook, see "Cook Time" section.
See the "Clean Cycle" section.
1. Check that the oven is off.
2. Press and hold the START (hold 3 sec to lock) keypad for 3 seconds.
3. A tone will sound, and "Loc" will be displayed.
4. Repeat to unlock.
NOTE: Only the CLOCK, OVEN LIGHT and TIMER keypads will function with the controls locked.
The cooktop functions are not affected by the oven control lockout.

COOKTOP USE

To Set:
1. Push in and turn knob counterclockwise to IGNITE.
All surface burners will click. Only the burner with the control
knob turned to IGNITE will produce a flame.
2. Turn knob to anywhere between HIGH and LOW.
REMEMBER: When range is in use, the entire cooktop area
may become hot.
Power Failure
In case of prolonged power failure, the surface burners can be lit
manually. Hold a lit match near a burner and turn knob
counterclockwise to IGNITE. After burner lights, turn knob to
setting.
5