Epson ELPLS02 Instruction Manual page 19

3. Mounting the zoom lens (when a lens has not been installed)
Remove the power cable before attempting to attach
the lens. Otherwise, there is the risk of an electric shock.
Memo
(1) Remove the front case and take out the cover plate.
1. Take out the four screws and remove the front case.
Screws (four)
02̲SZL̲DTP̲E.p65
Warning
Always mount and dismount the lens in a
clean room, to minimize the amount of dust.
Excessive dust inside the lens could cause
damage.
Front case
Page 17
17
03.2.19, 5:39 PM Adobe PageMaker 6.5J/PPC