TABLE OF CONTENTS
Speci cations
www.PyleUSA.com
2
INTRODUCTION
This rechargeable desktop CO2 monitor and data logger is designed to measure
carbon dioxide, temperature, and humidity making it ideal for measuring indoor
3
air quality in homes, businesses, o ces, and classrooms. Poor air indoor air
quality can lead to drowsiness, inability to concentrate, and even illness (see "Sick
Building Syndrome").
3
Visit our website www.PyleUSA.com to download the PCO2MT05 Software.
3
BEFORE YOU START
1. This monitor contains sensors and microprocessors that use precision electronics.
4
It must be kept away from water, heat, re, combustible liquids and strong
electromagnetic interference to prevent damage.
5
2. For accurate results do not block the air sampling inlets. Avoid strong or hot winds
blowing towards the air sampling inlets.
3. Wet cotton cloth or 95% alcohol should be used to clean the monitor. Do not use
6
abrasive agents or corrosive liquid for cleaning to avoid damage or scratching the
surface.
6
4. Do not dismantle or modify the monitor.
5. This device can be powered and charged simultaneously using either a PC USB
port or the supplied 5.0V DC power adapter. Only use the power adapter that
8
comes with the monitor.
BUTTON FUNCTIONS
9
12
12
13
Power Button - turns the power ON/OFF
Up Arrow Button - change between degrees Fahrenheit and Centigrade.
When MODE pressed, used as up arrow or to increase the value.
Left Arrow Button - turns alarm ON/OFF. When MODE pressed used as left arrow.
3
www.PyleUSA.com