Related Manuals for Bicom Systems Grandstream GXP-2160
Summary of Contents for Bicom Systems Grandstream GXP-2160
-
Page 1: Table Of Contents
Home PBXware SERVERware TELCOware SIPmon SIPProt Desktop & Mobile UADs Appliances From Bicom Systems Wiki Contents 1 Introduction 2 Requirements 2.1 Identifying phone model 2.2 Phone firmware 2.3 DHCP server 2.4 PBXware version 3 Installation 3.1 Power adapter 3.2 Power over Ethernet (PoE) 3.3 Find the phone IP address... -
Page 2: Requirements
This User Guide is written as general guide on how to set up the Grandstream phone model GXP-2160 to work with PBXware 3.1. Requirements Identifying phone model To start and successfully complete registration of your Grandstream phone you need to know which phone model you will setup. -
Page 3: Installation
Release: 3.1 (041373f), Running: 1.4.24-gc-75ee203", where "Release" denotes the exact version of your PBXware. Installation This chapter describes how to install and connect the phone to the electrical power and data network as well as how to apply factory settings. The following topics are covered: Power adapter Power over Ethernet (PoE) -
Page 4: Registering Phone
This step is not required for out-of-the-box phones, however, if the phone has been already used then it is a must. Press Home button. Go to System and press the Select button. Go to Operations and press the Select button. Confirm your action by pressing the Yes button. - Page 5 Navigate to Settings:UAD. Make sure Grandstream UAD is enabled. To check the UAD status click on the edit icon corresponding to your Grandstream phone. Make sure Status is set to Active, Auto provisioning is set to No, and DHCP is set to Yes. Click on the Save button to save changes.
- Page 6 The following topics are covered: Hostname or IP Address DNS SRV Registering your device A) Line configuration from devices web interface. To access the web interface of your Grandstream phone, first you must know it's IP address on your network. To find the IP address of your device please: Press the Home button.
- Page 7 Go to SIP user ID and enter PBXware extension number. Example: 1003 and press the Save button. Go to SIP Password and enter PBXware extension secret e.g. %3DfChBz59, then press the Save button. Then go back to the main menu. If everything is done as above described, you should have successfully registered your phone to PBXware.
-
Page 8: Auto Provisioning
Auto provisioning This chapter describes how to set UAD settings, create PBXware extension and register the phone using DHCP or Static IP address. The following topics are covered: UAD settings Creating extension Registering phone UAD Settings UAD settings Login to PBXware web administration interface Open a new browser window and enter the IP address in order to access the PBXware web administration login screen. - Page 9 The standard options window will be shown below. Select Grandstream phone model from the UAD select box. Select Location: Local or Remote. Local is for all extensions registered on the LAN and Remote is for all extensions registered from remote networks, WAN, Internet etc. Click on the Next step button.
- Page 10 with the URL for auto provisioning. For more information refer to your router documentation or contact your network administrator. Phone first boot or user initiated reboot Auto provisioning process will start during phone first boot or after reboot process has been initiated by user.
- Page 11 Example for IP Address USING HTTPS: 192.168.1.10/prov Enter Auto Provisioning username and password into Config HTTP/HTTPS User Name and Config HTTP/HTTPS Password fields. If you choose to use server type TFTP enter Hostname or IP Address Example for Hostname: voip.bicomsystems.com Example for IP Address: 192.168.1.10 Click on Save and Apply button.
- Page 12 No or N/A, set to Yes and click on the Save button. NOTE: You must re-save all your extensions configured for Auto Provisioning. Follow instruction given for registering the phone using TFTP or HTTP & HTTPS. Retrieved from "http://wiki.bicomsystems.com/UAD_Grandstream_GXP-2160" Disclaimers - About Bicom Systems Wiki...