Table of Contents
Advertisement
6.2
Display information
SD card is full or defective.
Clear and format the SD card.
If the indication continues to appear, replace the SD card.
or
Battery level low
Replace the batteries.
No SD card inserted
6.3
Measuring / Logging
•
Plug the measuring input connectors into the corresponding channel input, observing
correct polarity.
•
Switch on the meter with the "▼ / Power" key.
The current measured values are displayed.
6.3.1
Starting the log function
•
To start the logger, press and hold the "LOG / Enter" key for 2 seconds. Scan"
appears briefly in the upper part of the display as confirmation. "Datalogger" appears
between the channel 2 and 3 displays. The lettering "Datalogger" flashes and the
control sound is audible at the set log interval (if not disabled).
6.3.2
Exiting the log function
•
To exit the log function, press and hold the "LOG / Enter" key for 2 seconds.
The unit returns to measuring mode.
© PCE Instruments
5
Advertisement
Table of Contents
