Contents Safety notes ................... 1 Function ....................2 Specifications ..................2 Scope of delivery .................. 2 System description ................3 Operation ....................4 Measurement preparation ....................4 Display information ......................5 Measuring / Logging ......................5 Backlight .......................... 6 Switchin the meter off and on ................... 6 Data transfer to the PC .....................
Safety notes Please read this manual carefully and completely before you use the device for the first time. The device may only be used by qualified personnel and repaired by PCE Instruments personnel. Damage or injuries caused by non-observance of the manual are excluded from our liability and not covered by our warranty.
132 x 80 x 32 mm Weight approx. 190 g / <1 lb Scope of delivery 1 x voltage data logger PCE-VR 10 3 x connection terminals 1 x SD memory card 1 x wall bracket 1 x adhesive pad 6 x 1.5 V AAA battery...
Operation Measurement preparation • Before using the device for the first time, insert the batteries correctly into the device as described in chapter 7. The batteries are absolutely necessary to operate the internal clock when the meter is switched off. •...
Display information SD card is full or defective. Clear and format the SD card. If the indication continues to appear, replace the SD card. Battery level low Replace the batteries. No SD card inserted Measuring / Logging • Plug the measuring input connectors into the corresponding channel input, observing correct polarity.
Backlight 6.4.1 Battery operation Press the "▼ / Power" key to switch on the display backlight for approx. 6 seconds when the mezter is switched on. 6.4.2 Mains operation Press the "▼ / Power" key to switch the display backlight on or off when the meter is switched Switchin the meter off and on •...
6.6.1 SD card structure The following structure is automatically created on the SD card when it is used for the first time or after formatting: • Folder "MVA01 • File "MVA01001" with max. 30000 data records • File "MVA01002" with max. 30000 records if MVA01001 overflows •...
Page 10
6.7.1 Format SD card • Navigate to the advanced settings as described above. The prompt Sd F appears on the display. • Use the "▼ / Power" or "▲ / Time" keys to select yes or no. • Confirm the selection with the "LOG / Enter" key. •...
6.7.4 Key / control sounds • Navigate to the advanced settings as described above. Press the "SET" key repeatedly until "bEEP" appears on the display. • Use the "▼ / Power "or "▲ / Time" key to select yes or no. •...
Reset system If a serious system error occurs, resetting the system can solve the problem. To do this, press the reset key with a thin object while the instrument is switched on. Note that this resets the advanced settings to the factory default. RS232 interface The unit has an RS232 interface via a 3.5 mm socket.
Warranty You can read our warranty terms in our General Business Terms which you can find here: https://www.pce-instruments.com/english/terms. Disposal For the disposal of batteries in the EU, the 2006/66/EC directive of the European Parliament applies. Due to the contained pollutants, batteries must not be disposed of as household waste. They must be given to collection points designed for that purpose.
Page 14
PCE Instruments contact information Germany France Spain PCE Deutschland GmbH PCE Instruments France EURL PCE Ibérica S.L. Im Langel 4 23, rue de Strasbourg Calle Mayor, 53 D-59872 Meschede 67250 Soultz-Sous-Forets 02500 Tobarra (Albacete) Deutschland France España Tel.: +49 (0) 2903 976 99 0 Téléphone: +33 (0) 972 3537 17 Tel.