Wireless ESP-07S User Manual page 15

The type of this command is "executed". It's used to restart the module.
AT+GMR – View version info
This AT command is used to check the version of AT commands and SDK that you are using, the type
of which is "executed".
AT+GSLP – Enter deep-sleep mode
This command is used to invoke the deep-sleep mode of the module, the type of which is "set". A
minor adjustment has to be made before the module enter this deep sleep mode, i.e., connect
XPD_DCDC with EXT_RSTB via 0R.
15