Step - Samsung DMR57LFB Installation Manual

installing the dishwasher
STep  elecTrIcAl reqUIreMeNTS
The electrical requirements for the dishwasher are as follows:
• In the United States, in accordance with the National Electric Code/State and Municipal codes and/or
local codes.
• In Canada, in accordance with the Canadian Electric Code C22.1-latest edition/Provincial and Municipal
codes and/or local codes.
1. The dishwasher must be connected with the correct rated voltage supply marked on the
rating plate of the unit.
. Ensure that the Circuit Breaker connected to the dishwasher is off.
. The power cable must not extend more than 4 ft (1.2 m) from the side of the dishwasher.
. Check with a qualified electrician or serviceman if you are unsure whether the dishwasher is
properly connected.
. Do not connect another appliance to the same power outlet as the dishwasher.
. Before connecting the power cable to the dishwasher, ensure that there are no electrical
hazards (which may result in fire, explosion, electric shock, or personal injury).
. The power cable should go through the channels at the base of the dishwasher as shown in
Figure 3.
<figure >
Water supply
line
10_ installing the dishwasher
power cable
¾~½ in.
(0~0 mm)