Advertisement
VISION TV / SAT Power Tester - V18-310
Instructions
Introduction
• This innovative tester will assist professional installers of
domestic TV and satellite systems, commercial and
communal IRS, CATV and MATV.
• It will accurately simultaneously measure the DC voltage
(30v Max) and DC current (10A max) passing through a 75
ohm coaxial cable. It will also simultaneously indicate if a
22kHz signal is present on the coax cable in satellite
systems connected to: legacy satellite receivers SKY+,
Sky+HD, Sky Q, Freesat, Freesat HD, dSCR, SCR and DiSEq
installations etc.
• IMPORTANT: The V18-310 TV/ SAT Power Tester requires
a PP3 (6LR61, MN1604) 9V battery and the press to test
button
measurements, but for convenience it will indicate an
approximate current value when line powered and/or the
press to test button is not operated.
• The V18-310 TV/SAT Power Tester will pass RF frequencies
with minimal attenuation so that voltage and current
measurements can be made while operating TV and
satellite equipment.
operated
to
make
accurate
current
2
Advertisement
