Operating Procedure; Maintenance - Extreme Tools EX3304TC Manual

OPERATING PROCEDURE

MAINTENANCE

Lubricate the casters once a year with high quality ball bearing grease.
Lubricate the slides twice a year with high quality, petroleum-based
lubricant. This may be required more often If operating the tool box in colder
climates.
Use mild detergent and water to clean drawer fronts, drawer trim and other
surfaces.
Grease and oil can be removed with standard, non-abrasive, non-
flammable cleaning products.
Auto wax will help preserve the unit's high gloss finish. Follow directions as
provided.
Drawer Removal
Pull drawer out so that it is almost
fully extended.
Push up on the black lever on one
drawer slide and at the same time
push down on the lever on the
other side.
With the levers in these positions,
pull the drawer out until it releases
from the drawer slides.
Drawer Replacement
Extend the drawer slides.
Carefully align the brackets on
the sides of the drawers with the
slots of the cabinet slides. Insert
the brackets on the side of each
drawer into the slots of the cabinet
slides.
Once properly inserted,
completely close the drawer to
set the slides into their properly
functioning positions.