Milwaukee 48-22-8510 Operator's Manual page 5

Item
NOTE:
intended location of your chest/cabinet. This prod-
assembly.
Attaching the Side Handle
Attach the side handle to the rolling cabinet using
four bolts (AA).
NOTE: The holes in the cabinet are tapped and do
not require nuts.
Side handle
Swivel caster with brake
Rigid caster
Bracket
Bumper
Cord Storage Brackets
Installing the Casters
cauTion
cauTion
1. Ensure all cabinet drawers are securely locked
into place using the key lock on the rolling cabi-
net.
2. Lay the rolling cabinet on its back. Use the pack-
3. Mount the two swivel casters with brake to the
rolling cabinet using four bolts (CC) and washers
(BB) per caster. The swivel casters with brake
should be installed on the end of the cabinet with
the side handle.
4. Mount the two rigid casters to the opposite end
of the rolling cabinet using four bolts (CC) and
washers (BB) per caster.
5. Tighten all bolts securely with a wrench.
AA
6. Return the rolling cabinet to its upright position.
CC
5
Do not overtighten the screws.
BB
Quantity
1
2
2
2
4
4