More Guidance; Do Not Disturb; Adding Favorites; Setting Vibration Strength - Huawei Watch Fit Manual

More guidance

Do Not Disturb

Swipe down on the watch's home screen and touch
Alternatively, on your watch, go to Settings > Do Not Disturb. You can set it to all day or
schedule a time period for this mode.
After Do Not Disturb is enabled:
Messages and notifications will not be displayed on the watch, and the Raise to wake
•
feature will be disabled.
The alarm will vibrate and ring as normal.
•

Adding favorites

1
On your watch, go to Settings > Display > Favorites, and select your preferred data, such
as sleep, stress level, ,heart rate ,music ,weather , activity record, etc.
2
Then, swipe left or right on the home screen of the watch to check which cards you
added.
A maximum of six cards can be displayed.

Setting vibration strength

On the watch, go to Settings > Strength, then select your preferred vibration strength level,
such as Strong, Soft, or None. Your watch will then automatically return to the previous
screen.

Turning the screen on and off

Using Raise to wake: Open the Huawei Health app, go to the device settings screen, enable
or disable Raise to wake.
Adjusting the screen brightness level: On your watch, go to Settings > Display >
Brightness, and set your preferred screen brightness level.
Setting Always on Display: On your watch, go to Settings > Display > Advanced, and set
the screen on time to 5 min, 10 min, 15 min, or 20 min. After it is set, swipe down on the
home screen of the watch, touch
you set.
Setting Sleep time: On your watch, go to Settings > Display > Advanced and set the screen
sleep time to 10 sec, 15 sec, or 20 sec. If Sleep is set to Auto, the watch screen will turn off
when you tilt or lower your wrist.
to enable Do Not Disturb mode.
. The screen will then stay on for the amount of time
19