Advertisement
Y2638
Instruction Sheet
Install a Single Rack-Mount Kit
Use the Kit to mount the Product on the left or right
side of a standard 19-inch rack. See Figure 2.
To mount the Product on the left-side of the rack:
1. Attach one of the rack brackets to the right-front
side of the Product with three #8-32 x ½ inch
panhead screws. Keep the bracket face with the
three holes facing toward the front.
2. Attach the other rack bracket to the left-front side
of the Product with three #8-32 x ½ inch panhead
screws.
#8 - 32 x 1/2" Panhead Screw
2
M6, Panhead,
Hex Screw
Rack Bracket
Rack Screw Plate
M6, Panhead,
Hex Screw
3
4
Figure 2. Single Rack-Mount Kit
3. With three panhead hex screws (M6), and three
nuts, fasten the left-side of Rack Faceplate to the
right side of rackmount.
4. Install the entire assembly into the rack. From the
rear of the rack, align the assembly to the holes in
the rack. At the front of the rack, use six panhead
hex screws (M6) to fasten the Rack Faceplate
and Rack Screw Plate through the rack and Rack
Brackets.
Rack Faceplate
Rack Bracket
1
#8 - 32 x 1/2"
Panhead Screw
hun002.eps
2
Advertisement
