Table of Contents
Advertisement
interface is strongly recommended. We recommend DMA mode for fast writing.
DMA Setting
Before you install your COMBO drive, we recommend to set DMA to enabled on your PC system. See the
following procedure to set DMA transfer mode in windows oprerating system.
(Windows 98/ME)
+ Click on START
+ Click on Settings
+ Select Control Panel
+ Select the System Icon
+ Select the Device Manager panel
in System Properties
+ Expand the CD-ROM icon
Windows 2000/XP
Select the DMA mode by selecting
[Start > Setting > Control Panel > System > Device Manager > IDEATA/ATAPI Controller >
Default/Assistant IDE Channel Advanced Information]
+ Select your CD-R/RW drive
+ Click on the Properties button
+ Click on the Settings tab
+ Check the DMA checkbox to enables DMA.
+ Click OK
+ Restart your PC
Advertisement
Table of Contents
