System Requirements - Samsung SM-352N Manual

Using the Drive

System Requirements

System Requirements
Before you install the COMBO drive, we strongly recommend that you check that your setup meets the system
requirements listed below.
Item
Computer
Free expansion unit
Disk space
Windows version
MS-DOS
DVD Video playback
The RPC feature is supported on DVD players and is used with DVD-video discs (such as movies). Currently,
the motionpicture industry has divided the worldinto different regions or zones thatcorrespond to the regional
markets intowhich the motion picture industry releasesmovies. Simply put, RPC codes are placedon movies
marketed throughout the world,based on the region of the world inwhich they are being sold. These
RPCcodes help control and prevent piratingof new movies into other motion pictureregions prior to their true
releasedates within those markets.
The SM-352N COMBO drive supports RPCphase II. In the RPC-2 mode, the localcode can be changed by
users. RPC-2is selected by default for the SM-352N COMBO drive.
You can change the region code up tofive times via an MPEG application.
Please contact your dealer or local SAMSUNG representative if you wish tochange the local code more than
fivetimes.
Description
Intel Pentium II 400MHz/Celeron 466A(or higher), 128 MB of RAM (or higher) with
an 80pin IDE interface for Ultra DMA.
5.25 inch
700 MB minimum
Windows 98/2000/ME/XP/NT4.0 (or higher)
(For Windows NT, we recommend Service Pack2, and Version is over 4.00.1381)
5.0 or higher (For MS-DOS, The CD-R/CD-RW driver can only read a disc without
premaster Software.)
PC with Windows 98/2000/ME/XP/NT4.0 DVD-Video playback software and
appropriate hardware (the Power DVD MPEG software is included in the COMBO
drive package)
DVD Region Protection Coding (RPC):