Advertisement
Installing DVD R/RW Drive
and Connecting Cables
Connecting the Power Cable
Hold the power cable (with four pins) in the power box within the computer with the cutoff edges(
facing up and connect it to the power port in the back of the DVD±R/RW Drive
A - Cutoff edges
Connecting E-IDE Cable
Improperly connected power cable may cause malfunction. Check the direction of the
power cable and the cutoff edges before connecting the cable.
When you use one E-IDE cable
Set the jumper to SL (slave) in the Master/Slave port in the back of the DVD±R/RW Drive.
)
1 +5V DC
2 Ground
3 Ground
4 +12V DC
Advertisement
