Upgrading The Firmware Flash Memory; System Requirements - Samsung SC-148A Manual

Using the Drive

Upgrading the Firmware Flash Memory

The product firmware can be upgraded by downloading the updated file from the following Web site:
http://samsung-ODD.com
http://samsung.com

System Requirements

Before you install the CD-ROM drive, we strongly recommend that you check that your setup meets the
system requirements listed below.
Item Description
Type of computer Intel Pentium II 166MHz(or higher), 16 MB of RAM (or higher) with an IDE interface
Free expansion unit 5.25 inch
Disk space 100MB minimum
MS-DOS version 5.0(or higher)
Windows version Windows 95 / 98 / 2000 / ME / XP Windows NT 4.0 (or higher)