Sony KDL-22BX300 Service Manual page 29

Factory Mode
--Color Temperature--
Back
Color Temp
R Gain
G Gain
B Gain
R Offset
G Offset
B Offset
Recall Data
Data Backup
5. Press the or Onscreen cursor buttons to select the
Color Temp type. (Cool, Neutral, Warm1, or Warm2.)
6. After the correct Color Temperature is selected, press the
to select the Temperature type that needs to be modified.
7. After the correct Temperature type is selected, press the
to increase the data value, or press to decrease the data
value.
8. Complete the data value adjustments to the remaining
temperature items within the selected temperature type.
NOTE: Changes to the data value must be saved within the
Temperature type selected before making changes to one of
the other Temperature types.
9. To save the changes, press the to select Data Backup,
then press .
KDL-22BX300/32BX300
>>
<[ Cool ]>
<[ 443 ]>
<[ 443 ]>
<[ 443 ]>
<[ 512 ]>
<[ 512 ]>
<[ 512 ]>
<[ Off ]>
<[ Off ]>
[</>]Set [Menu] Exit
SERVICE ADJUSTMENTS
Factory Mode
--Color Temperature--
Back
Color Temp
R Gain
G Gain
B Gain
R Offset
G Offset
B Offset
Recall Data
Data Backup
10. Do one of the following:
a. To make changes to one of the other Temperature types,
repeat steps 5 through 9.
b. To exit Factory mode, press
NOTE: The other categories listed in the Factory Mode menu
will be covered in the training manual for these models.
>>
<[ Cool ]>
<[ 443 ]>
<[ 443 ]>
<[ 443 ]>
<[ 512 ]>
<[ 512 ]>
<[ 512 ]>
<[ Off ]>
<[ W/B ]>
[</>]Set [Menu] Exit
POWER
24