Kdl-32Bx300 With Cmo Panel Only - Sony KDL-22BX300 Service Manual

1-3-3. KDL-32BX300 WITH CMO PANEL ONLY

A
Disconnect 3 connectors from G2LE (Power) Board
B
Remove 4 screws from G2LE (Power) Board to detach from Left and Right Spine Frames
C
Disconnect 5 connectors from A Board
D
Remove 4 screws from A Board to detach from Left Spine Frame and Support Bracket
E
Remove 2 screws from Left and Right Spine Frames to detach from LCD Panel
F
Remove 2 screws from Left and Right Spine Frames to detach from Bottom Frame
G
Remove 1 screw from Bottom Frame to detach from LCD Panel
H
Remove 1 screw from Support Bracket to detach from LCD Panel
I
Carefully Lift up LCD Panel to remove from Bezel
J
Pull Button Control From underneath and lift out from Bezel Assembly
K
Disconnect 1 connector and release 3 top clips to remove H2 Board
L
Disconnect 1 connector from H Board and release from LED Guide
E
B
F
A
KDL-22BX300/32BX300
J
K
J
I
G
C
H
D
DISASSEMBLY/PART NUMBER INFORMATION
NOTE: Les composants identifies per un trame et
NOTE: The components identified by shading
une marque
and ! mark are critical for safety. Replace only
Ne les remplacer que par une piece portant le
with part number specified.
numero specifie.
(Check the Sony Electronics Service Information website for any additional service related issues for this model.)
252
251
REF. NO. PART NO. DESCRIPTION
251 1-474-200-11 G2LE BOARD, COMPLETE
252 NA FRAME, SPINE(R) (32)
253 NA FRAME, SPINE(L) (32)
254 NA FRAME, BOTTOM (32)
FOR FRAME PART NUMBER INFORMATION
REFER TO THE LCD PANELS SERVICE MANUAL
255 NA A BOARD, MOUNTED
FOR A BOARD PART NUMBER INFORMATION
REFER TO THE LCD PANELS SERVICE MANUAL
NOTE: After replacing the panel, refer to section
2-2. Selecting the Panel Code After Replacement
After replacing the main Board or the LCD Panel, you must update the software to the
latest version. Instructions for updating the software are included with the software
package on the Sony Electronics Service Information website.
NOTE: The components identified by a red outline and a
! sont critiques pour la securite. confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
261
260
259
253
257
254
255
256
[ASSEMBLY INCLUDES] REF. NO. PART NO. DESCRIPTION
256 NA BRACKET, SUPPORT(BM3)
FOR BRACKET PART NUMBER INFORMATION
REFER TO THE LCD PANELS SERVICE MANUAL
257 NA LCD PANEL
FOR ALL LCD PANEL PART NUMBER INFORMATION
REFER TO THE LCD PANELS SERVICE MANUAL
After replacing the main Board or the LCD Panel, you must update the software to the latest
version. Instructions for updating the software are included with the software package on the
Sony Electronics Service Information website.
258 1-857-612-11 H BOARD, MOUNTED
259 1-857-764-11 H2 BOARD, MOUNTED
260 4-163-790-01 BUTTON, CONTROL
261 X-2547-388-1 BEZEL (32) ASSEMBLY
2-580-592-01 SCREW, +PSW M3X8
4-159-298-01 SCREW, +PSW M4X10
mark contain
258
[ASSEMBLY INCLUDES]
16