Advertisement
Installing the Temperature Sensor Pro
Follow steps 1 through 6 to connect the Temperature Sensor Pro to the Edge Connect port on the display.
Once complete, connect the power splitter to the display.
User Manual – Temperature Sensor Pro
1.
Some systems have more than one
mounting option. Select the top
location to mount the Temperature
Sensor Pro.
2.
Remove the selected peripheral
cover from the display head to
expose the peripheral bay.
3.
Gently press the Temperature Sensor
Pro into the peripheral bay making
sure the connector is mated.
4.
Install the 2 flat head screws included
with the Temperature Sensor Pro.
5.
Remove the protective film from the
included mylar covers and place the
covers over the screws.
6.
Connect the micro-USB cable to another
Edge Connect port to provide additional
power for the Temperature Sensor Pro.
UM600503 Rev B, page 6 of 18
Advertisement
