See Section 5 for more information on safety. This manual contains information that is important for the proper setup of the Temperature Sensor Pro. Before setting up and powering on your new Temperature Sensor Pro, read through this manual, especially the Installation, configuration, and operation chapters.
Unpacking the Temperature Sensor Pro Verify that the box contains: • Temperature Sensor Pro • Quick Install Guide • 2 mounting screws • 2 screw covers • 1 cable User Manual – Temperature Sensor Pro UM600503 Rev B, page 5 of 18...
Page 6
Installing the Temperature Sensor Pro Follow steps 1 through 6 to connect the Temperature Sensor Pro to the Edge Connect port on the display. Once complete, connect the power splitter to the display. Some systems have more than one Install the 2 flat head screws included with the Temperature Sensor Pro.
Page 7
Press “Update Driver” Then double click “Magnity Thermal Camera” Press “Browse my computer for drivers” Press “Let me pick from a list of available drivers on my computer” User Manual – Temperature Sensor Pro UM600503 Rev B, page 7 of 18...
Page 8
Press “Next” updated your drivers”, press “Close” For use with Android systems • Use the Temperature Sensor Pro in the default mode of the system. • Run the application. User Manual – Temperature Sensor Pro UM600503 Rev B, page 8 of 18...
Measure distance to customer: 24 inches Measure height of customer: 5 feet to 6.5 feet The Temperature Sensor Pro is able to auto adjust camera angle to detect object and read temperature data. Expert mode: Measure distance to customer: 12 inches - 40 inches Measure height of customer: 5 feet to 6.5 feet...
See this user manual’s last page for worldwide technical support phone numbers. Contact us to get Windows and Android SDK for developers to use. User Manual – Temperature Sensor Pro UM600503 Rev B, page 10 of 18...
Elo has put in place recycling arrangements in certain parts of the world. For information on how you can access these arrangements, please visit www.elotouch.com/e-waste-recycling-program/. User Manual – Temperature Sensor Pro UM600503 Rev B, page 11 of 18...
Standard EN 55032 Class A and the Low Voltage Directive 2014/35/EU as indicated in European Standard EN 60950-1. General Information to all Users: This equipment generates, uses and can radiate radio frequency energy. If not User Manual – Temperature Sensor Pro UM600503 Rev B, page 12 of 18...
Page 13
If you need additional help, consult your dealer, manufacturer, or an experienced radio or television technician. Agency Certifications The following certifications and marks have been issued or declared for this peripheral: User Manual – Temperature Sensor Pro UM600503 Rev B, page 13 of 18...
Page 14
Power Specifications Electrical Ratings Input 5VDC Operating Conditions Temperature 10°C- 30°C Humidity 20% to 80% (non-condensing) Storage Conditions Temperature -20°C - 50°C Humidity 5% to 95% (non-condensing) User Manual – Temperature Sensor Pro UM600503 Rev B, page 14 of 18...
Section 7: Warranty Information For warranty information, go to https://www.elotouch.com/support/warranty User Manual – Temperature Sensor Pro UM600503 Rev B, page 15 of 18...
Legal Disclaimer The Elo Access Temperature Sensor Pro is not intended to diagnose, treat, cure, mitigate, or prevent any disease or health condition, including COVID-19. An indication of an elevated body temperature should be confirmed by a secondary evaluation method (such as a non-contact infrared thermometer or clinical grade contact thermometer).
Page 17
For the accuracy of temperature, please use the Temperature Sensor Pro after turning it on for 5 minutes. When the application is first launched, if the image has an X-axis and Y-axis offset, user needs to run the coordinate calibration function at a distance 24 inches from the device, which relies on the ISV to match the image of the infrared camera with the image of the RGB camera.