Albalá Ingenieros AVD3003C01 Manual

Albalá Ingenieros AVD3003C01 Manual

Triple 1 loop-through input to 2 outputs analog video distributor

Advertisement

Quick Links

AVD3003C01
TRIPLE 1 LOOP-THROUGH INPUT TO 2 OUTPUTS ANALOG VIDEO
DISTRIBUTOR
Version 1.0
Albalá Ingenieros, S.A.
22 September 2016 - © Albalá Ingenieros S.A. - All rights reserved
Medea, 4 - 28037 Madrid - Spain

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AVD3003C01 and is the answer not in the manual?

Questions and answers

Summary of Contents for Albalá Ingenieros AVD3003C01

  • Page 1 AVD3003C01 TRIPLE 1 LOOP-THROUGH INPUT TO 2 OUTPUTS ANALOG VIDEO DISTRIBUTOR Version 1.0 Albalá Ingenieros, S.A. 22 September 2016 - © Albalá Ingenieros S.A. - All rights reserved Medea, 4 - 28037 Madrid - Spain...
  • Page 2 AVD3003C01...
  • Page 3: Table Of Contents

    AVD3003C01 TRIPLE 1 LOOP-THROUGH INPUT TO 2 OUTPUTS ANALOG VIDEO DISTRIBUTOR Version 1.0 1. DESCRIPTION ........................5 1.1. The AVD3003C01 ........................... 5 1.2. Features ............................. 5 1.3. Block diagram ..........................6 2. SPECIFICATIONS ......................... 7 3. INSTALLATION ........................9 3.1. Initial inspection ..........................9 3.2.
  • Page 4 AVD3003C01...
  • Page 5: Description

    The AVD3003C01 module is a triple analog video distributor with loop-through inputs and two outputs per channel. The AVD3003C01 is a TL3000 terminal line module and can be housed in a three rack unit (3 RU) UR3000 mounting frame or a 1 RU UR3100 mounting frame.
  • Page 6: Block Diagram

    Albalá Ingenieros | Manual AVD3003C01 1.3. Block diagram...
  • Page 7: Specifications

    Albalá Ingenieros | Manual AVD3003C01 2. SPECIFICATIONS Analog video signal input Connector Return loss >40 dB up to 10 MHz Type Passive Loop-Through Signal format According to ITU-R BT.470-6 standard Accepted formats 625i50, 525i59.94 Number of inputs 1 per section, 3 sections Allowed voltage range ±5 V...
  • Page 8 Albalá Ingenieros | Manual AVD3003C01 AVD3003C01...
  • Page 9: Installation

    ELECTROSTATIC DISCHARGE. Always use antistatic bags clearly identified with a high degree of shielding for storage and transportation. The AVD3003C01 module is composed of two parts: one AVD3003P01 main board and one XVD3000P03 rear board. Both parts must be installed in a UR3000 or UR3100 mounting frame following the instructions in the corresponding section of this chapter.
  • Page 10: Environmental Considerations

    4 - Attach the rear board to the mounting frame with two M3 metric screws and tighten. 5 - Insert the AVD3003P01 board (main board of the AVD3003C01 module) into the front of the mounting frame. The edges of the card slide into two plastic guides inside the mounting frame.
  • Page 11 Albalá Ingenieros | Manual AVD3003C01 Details for installation of the module in 3 RU mounting frames Details for installation of the module in 1 RU mounting frames...
  • Page 12: Interconnection

    Albalá Ingenieros | Manual AVD3003C01 3.6. Interconnection The following figure shows the AVD3003C01 module rear board connector layout. Rear view of the AVD3003C01 The AVD3003C01 module provides three loop-through inputs (IN-A, LOOP-A, IN-B, LOOP-B, IN-C, LOOP-C) and two output per section (OUT1-A, OUT2-A, OUT1-B, OUT2-B, OUT1-C, OUT2-C), all for analog video signals.
  • Page 13 Albalá Ingenieros | Manual AVD3003C01 If the loop-through input (LOOP-X) is not used to send signal to another piece of equipment then it should be terminated with 75 Ω. For analog video connections a coaxial cable with 75 Ω of characteristic impedance...
  • Page 14 Albalá Ingenieros | Manual AVD3003C01 AVD3003C01...
  • Page 15: Operation

    Albalá Ingenieros | Manual AVD3003C01 4. OPERATION This section describes the significance of the front panel indicators of the AVD3003C01 module and their remote control and monitoring ability. 4.1. Front panel description The appearance of the front panel and the elements it contains are shown in the following illustration.
  • Page 16: Module Remote Control And Supervision

    Albalá Ingenieros | Manual AVD3003C01 4.2. Module remote control and supervision The AVD3003C01 CANNOT be remotely controlled or supervised.
  • Page 17: Glossary

    Albalá Ingenieros | Manual AVD3003C01 5. GLOSSARY...
  • Page 18 Albalá Ingenieros | Manual AVD3003C01 AVD3003C01...
  • Page 19: Regulations

    Albalá Ingenieros | Manual AVD3003C01 6. REGULATIONS ITU-R BT.470-6 (1998) Conventional analogue television systems. See also: ITU-R BT.1700, SMPTE 170M...
  • Page 20 Albalá Ingenieros | Manual AVD3003C01 AVD3003C01...
  • Page 21: Versions

    Albalá Ingenieros | Manual AVD3003C01 7. VERSIONS Ver. Date Description 13-06-2013 Preliminary Version 22-09-2016 First version...
  • Page 22 Albalá Ingenieros, S.A. Medea, 4 - 28037 Madrid Spain +34 913274453 www.albalaing.com info@albalaing.com...

Table of Contents