Preparation - Zenith ZCS3582W Instruction Manual

Hide thumbs Also See for ZCS3582W:
Table of Contents

Advertisement

4

Preparation

• Your refrigerator should be installed
at least 30 cm away from heat
sources such as hobs, ovens, central
heater and stoves and at least 5
cm away from electrical ovens and
should not be located under direct
sunlight.
• Please make sure that the interior
of your refrigerator is cleaned
thoroughly.
• If two refrigerators are to be
installed side by side, there should
be at least 2 cm distance between
them.
• When you operate your refrigerator
for the first time, please observe the
following instructions during the
initial six hours.
• The door should not be opened
frequently.
• It must be operated empty without
any food in it until it reaches set
temperature.
• If there is a power failure do not
open the door. Frozen food should
not be affected if the failure lasts
for less than 15 hours. If the failure
is longer, then the food should
be checked and either eaten
immediately or cooked and then re-
frozen.
• Original packaging and foam
materials should be kept for future
transportations or moving.
• For temporary storage of larger
items in the freezer the shelves/
baskets can be removed as required.
• Food contact with the temperature
sensor in the freezer compartment
may increase energy consumption
of the appliance. Thus any contact
with the sensor(s) must be avoided.
• In some models, the instrument
panel automatically turns off 5
minutes after the door has closed.
It will be reactivated when the door
has opened or any key pressed.
• Due to temperature change as
a result of opening/closing the
product door during operation,
condensation on the door/body
shelves and the glass containers is
normal especially in Summer.
12
EN

Advertisement

Table of Contents
loading

Table of Contents