Sleep/D.r.c Function; Setting Up The Language Features - Samsung HT-DM150 Instruction Manual

Sleep/D.R.C Function

To set up Sleep
Press the Sleep button.
•
Each time the button is pressed the selection
toggles as follows: SLEEP 10 SLEEP 20
SLEEP 30 SLEEP 60 SLEEP 90
SLEEP 120 SLEEP 150 OFF.
To Review Sleep Setting
•
Press the Sleep button.
The remaining time for the selected Sleep time is displayed on the front panel.
•
Pressing the button once again changes the Sleep time from the last setting.
Activating Dynamic Range Compression
You can enjoy a powerful sound even at a low volume level by
compressing the dynamic range (difference between the maximum and
minimum sounds).
From the remote control ONLY:
Press the D.R.C button.
• Each time you press the button,the dynamic range
compression mode alternates between on and off. Select
"D.R.C.ON " while watching the DVD at night. (You can obtain
a powerful sound at a low volume.)
• This function takes effect only when Dolby Digital or DTS
Digital Surround is activated.
• When the Stop button is pressed, DRC is switched to Off.
29
What is the
Sleep function?
You can set the sleep time so that
the unit powers off automatically
after a preset period of time.
D.R.C

Setting up the Language Features

Using the DVD player's Setup function, you can customize the Menu
Language, Subtitle Language, and Disc Menu Language.
To set up the language feature
1
Setup/P . Adj
Press the button from the stop
mode.
3
Press the Enter button or Right ( ) button.
To End the Language Features Setup
Setup/P . Adj
•
Press the button again.
2
Press the Up/Down ( / ) button to select
the desired item.
If the Setup/P.Adj button is
pressed during the
language setup, it returns to
(PLAYER MENU LANGUAGE) the stop mode again.
(AUDIO LANGUAGE)
(SUBTITLE LANGUAGE)
(DISC MENU LANGUAGE)
4
Press the Up/Down ( / ) button to select
the desired language and then press the Enter
button.
30