Subscribe to Our Youtube Channel
Related Manuals for Simco-Ion Type N Series
Summary of Contents for Simco-Ion Type N Series
- Page 1 Type N Power Supplies INSTALLATION AND OPERATING INSTRUCTIONS POWER SUP PLIE S 5 10 0 46 0 Rev E...
-
Page 2: Table Of Contents
TABLE OF CONTENTS 1. SAFETY WARNINGS ................1 2. DESCRIPTION ................... 2 Receipt of Equipment: ......................2 Return Shipments: ........................2 3. INSTALLATION .................. 3 Mounting and Grounding the Power Supply ................3 Input Line Voltage Connections ...................3 High Voltage Connections for Standard Cable ..............4 4. -
Page 3: Safety Warnings
1. SAFETY WARNINGS NOTE – Statements identified with a NOTE indicate precautions necessary to avoid potential equipment failure. CAUTION – Statements identified with a CAUTION indicate potential safety hazards. NOTE – This equipment must be correctly installed and maintained. Adhere to the following notes for safe installation and operation. -
Page 4: Description
Do not add any device to the power supply without first consulting Simco-Ion. If it should become necessary to contact Simco-Ion regarding the power supply, please be sure to reference the power supply model number and unit number. These numbers are listed on the label affixed to the power supply. -
Page 5: Installation
3. INSTALLATION Mounting and Grounding the Power Supply The power supply is designed for flat surface mounting and can be easily mounted using the mounting flanges at the base of the unit. The ambient temperature of mounting are of the power supply must not exceed 105˚F (40˚C). WARNING –... -
Page 6: High Voltage Connections For Standard Cable
WARNING – Electrical Shock Hazard Do not apply line voltage to the power supply until all grounds and high voltage connections are complete and static eliminating equipment has been installed. High Voltage Connections for Standard Cable When connecting high voltage cable through the high voltage outlets of the power supply enclosure, always install the strain relief bushing onto the cutout to insulate cable and prevent it from arcing to ground. - Page 7 Figure 1. Outline Drawings of Type N Power Supplies Figure 2. High Voltage Output Connections of Power Supply POWER SUP PLIE S 5 10 0 46 0 Rev E...
-
Page 8: Operation
4. OPERATION Before placing the equipment into operation, make certain all grounds and connections have been completed as described in Section 3. Make certain the static eliminating equipment is properly installed. To operate the static eliminating equipment, apply line voltage to the power supply. For power supply equipped with an ON/OFF switch, place the switch in the ON position. -
Page 9: Maintenance
Connect a suitable high voltage voltmeter to high voltage output terminal of power supply. Re-connect line voltage to power supply. If output voltage is out of specification, power supply is not functioning properly. Contact Simco-Ion or your local representative. POWER SUP PLIE S 5 10 0 46 0 Rev E... -
Page 10: Replacement Parts
7. REPLACEMENT PARTS When ordering replacement power supplies, be sure to specify the power supply model number and unit number, part description, part number and quantity. The model number and unit number can be found on the label attached to the power supply. Model # Power Supply Part # Xfmr Assy Part #... -
Page 11: Warranty
The equipment being returned under warranty should be shipped by the purchaser to Simco-Ion, 2257 North Penn Road, Hatfield PA 19440, transportation prepaid and insured for its replacement cost. Prior to returning any goods for any reason, contact Simco-Ion Customer Service at (215) 822-6401 for a Return Authorization Number. This number must accompany all returned items. - Page 12 Simco-Ion 2257 North Penn Road Hatfield, PA 19440 (215) 822-6401 (800) 203-3419 www.simco-ion.com customerservice@simco-ion.com © 2017 Simco-Ion. Printed in the U.S.A. POWER SUP PLIE S 5 10 0 46 0 Rev E...
Need help?
Do you have a question about the Type N Series and is the answer not in the manual?
Questions and answers