Memorizing The Channels; Selecting The Video Signal-Source - Samsung TXN2798HF Owner's Instructions Manual

O

Memorizing the Channels

Your TV can memorize and store all of the available channels for both "off-air" (antenna)
and cable channels. After the available channels are memorized, use the CH
CH
nels by entering the channel digits. There are three steps for memorizing channels:
selecting a broadcast source, memorizing the channels (automatic) and adding and delet-
ing channels (manual).

Selecting the Video Signal-source

Before your television can begin memorizing the available channels, you must specify the
type of signal source that is connected to the TV (i.e., an antenna or a cable system).
1
Press the MENU button to
display the menu.
Press the CH
select "Channel", then
press the VOL + button
2
Repeatedly press the
VOL + button to cycle
through these choices:
ANT (antenna) STD, HRC
or IRC (all cable TV).
Note: STD, HRC and IRC identify various types of cable
TV systems. Contact your local cable company to identify
the type of cable system that exists in your particular area.
At this point the signal source has been selected. Proceed
to "Storing Channels in Memory" (next page).
3.5
C T : TV O
HAPTER HREE PERATION
P E R AT I O N
buttons to scan through the channels. This eliminates the need to change chan-
button to
and