Samsung SPL4225D Owner's Instructions Manual page 49

Notes:
Both screen position and size will vary, depending on the type of PC monitor and its resolution. The table
below shows all of the display modes that are supported:
Video signal Dot X Line
640 X 350
640 X 400
720 X 400
640 X 480
IBM PC / AT
Compatible
800 X 600
1024 X 768
• The interlace mode is not supported.
• The PDP operates abnormally if a non-standard video format is selected.
Notes:
• When this PDP is used as a PC display, 24-bit color is supported (over 16 million colors).
• Depending on the manufacturer, y our PC display screen might appear different.
(and depending on your particular version of Windows).
Check your PC instruction book for information about connecting your PC to a PDP.
• If a vertical and horizontal frequency-select mode exists, select 60Hz (vertical) and 31.5kHZ (horizontal).
• In some cases, abnormal signals (such as stripes) might appear on the screen when the PC power is turned
off (or if the PC is disconnected). If so, press the Source button to enter the VIDEO mode.
Also, make sure that the PC is connected.
• Connect only a PC monitor to the monitor output port while viewing the PC screen. (Otherwise, random
signals might appear).
Vertical Horizontal
Frequency (Hz) Frequency (KHz)
70.086 31.469
85.080 37.861
85.080 37.861
70.087 31.469
85.039 37.927
59.940 31.469
72.809 37.861
75.000 37.500
85.008 43.269
56.250 35.156
60.317 37.879
72.188 48.077
75.000 46.875
85.061 53.674
60.004 48.363
70.069 56.476
75.029 60.023
84.997 68.677
Vertical Horizontal
polarity polarity
N P
N P
P N
P N
P N
N N
N N
N N
N N
N/P N/P
P P
P P
P P
P P
N N
N N
P P
P P
49