Advertisement
4.3.
OPERATING THE WIRELESS CONNECTION
4.3.1.
The wireless connection is made by holding down the marked button (fig.1) for approximately 3 seconds. To cancel wireless
operation hold down the wireless button (fig.1) for approximately 3 seconds. When the wireless operation is switched on or off the
unit will produce an audible indication.
4.3.2.
5 minutes after disconnecting the wireless operation the unit will shut down.
4.3.3.
If the unit is playing music, pressing the wireless button (fig.1) will pause the output and if pressed again will resume playing.
4.3.4.
To redial the last call made, press the wireless button (fig.1) twice in quick succession.
4.3.5.
To accept a phone call whilst playing music, press the wireless button once to answer. To disconnect a call press the wireless button
(fig.1) twice.
4.3.6.
Please note that the wireless function cannot be used when the unit is being charged.
4.3.7.
The lamp may be suspended by the hook or attached to any ferrous surface by using the magnets (fig.1).
NOTE: Both magnets need to be in contact with the ferrous surface in order that the lamp is held securely. One engaged magnet will
not be sufficient in all orientations. The lamp is also fitted with a pop out stand (fig.1) which can support the lamp at an angle.
fig.1
5. MAINTENANCE
5.1.
Keep the torch clean by wiping with a damp cloth.
5.2.
Store torch in a dry childproof area.
WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
BATTERY REMOVAL
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products
containing batteries (as defined within these regulations), that they are registered with Valpak's registered compliance scheme. Jack
Sealey Ltd's Batteries Producer Registration Number (BPRN) is BPRN00705.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
01284 703534
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
LED50WS
Issue 2
09/08/19
Advertisement
