Samsung HP-S4253 Owner's Instructions Manual page 33

Press the ▲ or ▼ button to memorize the channels of
3
the selected connection.
Press the ENTER button to select "Start".
Notes
• If the antenna is connected to ANT 1 IN (CABLE),
select "Cable" and if it is connected to
ANT 2 IN (AIR), select "Air".
• If both ANT 1 IN and ANT 2 IN are connected,
select the "Air + Cable".
Select the correct signal source (STD, HRC, and
4
IRC) by pressing the ▲ or ▼ button, then press
the ENTER button
.
Note
• STD, HRC, and IRC identify various types of cable
TV systems. Contact your local cable company to
identify the type of cable system that exists in your
particular area. At this point the signal source has
been selected. Proceed to "Storing Channels in
Memory" on page 38.
The TV will begin memorizing all of the available
5
channels.
After all the available channels are stored, the Auto
program menu reappears.
Press the ENTER button at any time to interrupt the
memorization process.
Press the ENTER button, then the menu to set the
clock mode is automatically displayed.
Press the ENTER button to select "Clock Mode".
6
▲ or ▼
Press the button to select "Auto" or "Manual",
then press the ENTER button.
Continued...
Plug & Play
Select the antennas to memorize.
Air
Start
Cable
Start
Air + Cable
Start
Move Enter
Plug & Play
Select the cable system.
STD
HRC
IRC
Move Enter
Plug & Play
Auto Program in progress.
Cable Channel 67
Stop
Enter
Plug & Play
Auto Program is completed.
14 Channels were memorized.
Air : 9 , Cable : 5.
OK
Enter
Plug & Play
Select the clock mode.
Clock Mode : English
Manual
Auto
Move Enter
Skip
Skip
Skip
Skip
Skip
33