Samsung HP-S4253 Owner's Instructions Manual page 42

Setting Up the Remote to Operate Your Cable Box
Turn off your cable box.
1
Press the CABLE button on your TV's remote control.
2
Press the SET button on your TV's remote control.
3
Using the number buttons on your remote control, enter
4
three digits of the cable box code listed on page 46 of this
manual for your brand of cable box. Make sure you enter
three digits of the code, even if the first digit is a "0".
(If more than one code is listed, try the first one.)
Press the POWER (
5
Your cable box should turn on if your remote is set up
correctly.
If your cable box does not turn on after set-up,
repeat steps 2, 3 and 4, but try one of the other codes
listed for your brand of cable box. If no other codes are
listed, try each code, 000 through 046.
Note on Using Remote Control Modes: Cable Box
When your remote control is in "Cable" mode, the volume buttons
still control your TV's volume.
42
) button on the remote control.