Table of Contents
Advertisement
SYSTEM SET-UP
UK
MENU 1: SYSTEM SETUP
TV System (NTSC/PAL 60/PAL/AUTO):
This unit is suitable for all makes for TV's.
You can select PAL or NTSC if necessary. PAL must be selected for use in Europe.
Auto Play: Turn Auto Play On/Off.
Video: Select between Interlace-YUV and P-Scan YPBPR video output.
Resolution: Select resolution levels from the HDMI output: 480 I/576I, 480P/576P,
720P, 1080I, 1080P
TV Type: Different values will be displayed here depending on your TV set. In most
cases you will be able to select from 4:3/PS (Pan and Scan), 4:3/LB (Letterbox), and
16:9 (best for widescreen TV sets).
Password:
The initial factory password is 0000. You can change the password
here.
Rating:
Select to control parental control settings. Any disc with a parental level
higher than the set level will not be played.
Resume (Off/On): If the last memory is set when the unit is on and the unit is
switched off, the last position on the DVD player will be memorised.
Default:
Select to revert to original factory set up on this unit.
Next Page: Navigate to next page of settings
Prev Page: Navigate to previous page of settings
Exit Setup: Exit Setup screen. Alternatively, press the 'Setup' button on the
remote.
12
Advertisement
Table of Contents
