Freezing The Current Picture - Samsung HP-T5044 Owner's Instructions Manual

Changing the Position of the PIP Window
4 Press the ▲ or ▼ button to select Position, then press the ENTER button. Press
the ▲ or ▼ button to select the desired PIP window position, then press the
ENTER button.
➢ In Double Window (
selected.
If the PIP window is set to Double Window (
➢
mode, the screen size or alignment may slightly differ depending on the signal
type.
Changing the PIP Channel
5 Press the ▲ or ▼ button to select Channel, then press the ENTER button. Press
the ▲ or ▼ button at the bottom of the remote to select the desired channel in the
PIP window, then press the ENTER button.
➢ The channel can be active when the sub picture is set to TV.
Press the EXIT button to exit.
and
Press the PIP CH
channel.

Freezing the Current Picture

1 Press the STILL button to freeze a moving picture.
Normal sound will still be heard. Press again to cancel.
➢
➢ To prevent screen burn-in, this function will automatically cancel after 5
minutes.
➢ While V-Chip is in operation, the Still function cannot be used.
) and Double Wide (
CH and buttons on the remote control to change the PIP
English - 34
) modes, Position cannot be
) or Double Wide ( )
T V PIP
PIP : On
Size :
Position :
Channel : Air 3
Move Return
Enter
T V PIP
PIP : On
Size :
Position :
Channel : Air 3
▲
Air 3
▲
RETURN
Move Enter Return
FAV.CH