Advertisement
Figure 2
The side-discharge chute has been removed for the
purpose of clarity.
1. Remove 2 plug bolts and
2 nuts here.
2. Welded post
3. Flange nut (5/16 inch)
11. Install the kicker to the underside of the mower deck
using 2 self-tapping screws (5/16 x 3/4 inch) at the
location shown in
Figure
Figure 3
1. Kicker
12. Install the decal to the area shown in
4. Carriage bolt (5/16 x 3/4
inch)
5. Baffle assembly
3.
2. Self-tapping screws (5/16
x 3/4 inch)
Figure
4.
G018015
1. Decal
A. Thoroughly clean the area where you will install
the decal.
B. Dampen the area with water or mildly soapy water.
C. Peel the decal from the backing and install it in
place
(Figure
D. Squeegee across the surface of the decal, starting
at the center of the decal and working toward the
edges, using overlapping strokes.
13. Install the mulching mower blades as described in your
Operator's Manual.
14. Install the mower deck as described in your Operator's
Manual.
Converting the Mower Deck to
Side Discharging
Reverse the steps in Installing the Recycler Kit above.
2
Figure 4
4).
1
Advertisement
